Convert Wired/Wireless Router to a Switch/Access Point

1. Connect your computer directly to the Modem/Router
2. Log onto your Modem/Router's web based configuration page
3. Navigate to the page that says "LAN" and then "DHCP Setup"
4. Make a note of "IP Pool Starting Address" and "Pool Size"
5. Disconnect the Modem/Router
6. Connect your computer directly to the Router/Wireless Router from a LAN port in the Router/Wireless Router. (Warning! Never connect to the WAN port)
7. Log onto your Router/Wireless Router's web based configuration page
8. Goto the page where it says "LAN"
9. Change the IP address to the one that you noted in Step #4, but outside the DHCP range. DHCP Range = ("IP Pool Starting Address") - ("IP Pool Starting Address" + "Pool Size")
10. Leave the entry of "Subnet Mask" as it is
11. Delete the entries under "Gateway" & " DNS Server". They don't matter now
12. Untick "DHCP Server". This turns off DHCP in the Router/Wireless Router, so now the Modem/Router will be the one acting solely as the DHCP server
13. Click Save
14. Connect the Modem/Router to a LAN port of the Router/Wireless Router
15. To make things working perfectly, you can do a repair of the "Local Area Connection" by right clicking the LAN icon in taskbar and select "Repair". If the "Local Area Connection" is missing from the taskbar, you can bring back it by right clicking "My Network Places" on Desktop and then selecting "Properties" OR by going to Start Menu → Settings → Control Panel → Network Connections. Then right click "Local Area Connection" and select "Properties". Then tick "Show icon in notification area when connected". You can also do a repair by right clicking "Local Area Connection" and selecting "Repair"

Done.

Smitfraud Virus

When this attacks you get the following



Solution

Download Smitfraudfix.exe from http://siri.geekstogo.com/SmitfraudFix.php

Optoma MovieTime DV10 Region Free

Below are the steps to make the Optoma MovieTime DV10 Projector region free.

1. Get a hold of "dvdrom.zip" file
2. Create a folder named "OptomaDV10" anyhwhere in your computer
3. Unzip the file "dvdrom.zip" to "OptomaDV10" folder. (There is a file "dvdrom.bin" inside "dvdrom.zip", but this is not an image file)
4. Burn the folder "OptomaDV10" to a CD-R or CD-RW as "Data" and "Finalize" (Do not burn it to a DVD. Do not burn as an "Image" or make it bootable)
5. Place the CD-R or CD-RW inside Optoma MovieTime DV10 Projector when it is turned OFF and leave it
6. Plug in the power cord of the Optoma MovieTime DV10 Projector and Power it ON with the remote
7. You will get a blue colored screen with the following "Smart Update - Upgrade to v2.06CTX-010" with a countdown of 20 (DO NOT DISCONNECT FROM MAINS SOCKET OR TOUCH ANY CONTROLS WHILST THIS SCREEN IS SHOWING!)



8. Wait till it countdowns to 0
9. Next you will get "Upgrading" (Do not do anything)



10. Next the screen will go away and you will see the regular Optoma MovieTime DV10 Projector screen with "READ" on the upper left corner
11. Stop playing the CD-R or CD-RW from your remote twice
12. Take out the CD-R or CD-RW

Your Optoma MovieTime DV10 Projector is now region free. Put in a DVD to test it. (No need to re-start the Optoma MovieTime DV10 Projector)

NB: If you do not stop playing the CD-R or CD-RW in step #11, then it will cycle through step #7 to step #11.

Indian ADs voiceover artists

1. ???????













2. ???????



3. Harish Bhimani